Contact us Facebook KENTEN LinkedIn youtube

Tent storage requirements for building ground

date 2023-04-03
check 246

Tent storage is a kind of cargo storage method with tent as the main container. It is widely used in logistics, warehousing, commerce and many other industries. Tent storage has the advantages of strong load-bearing capacity, good waterproof performance, quick disassembly and installation, and low cost. Therefore, it has attracted the attention of many companies.


storage tent


storage tent


 

When building a tent for storage, the ground must meet certain requirements.

1. Levelness requirements

The ground for tent storage needs to be relatively flat, and the flatness deviation should not exceed 5mm. If the ground is too uneven, it is easy to cause deformation of the tent and affect the bearing capacity of the tent.


2. Hardness requirements

The ground for tent storage should be firm, and the ground should not be too soft to prevent the tent from sinking.


3. Cleanliness requirements

The ground should be cleared of any sharp objects that could scratch or otherwise damage the tent.


Requirements for three different grounds for tent storage


1. Concrete floor

Tent storage needs to be built on concrete ground. The hardness of the cement floor is not less than C30, and the thickness is not less than 10cm, so as to ensure that the expansion screws and other parts installed during installation will not fall off or leave the ground.


2. Grass or mud ground

When setting up tent storage on grass or mud, it is generally necessary to use very long steel brazing nails to fasten to the ground. Otherwise, the tent is easy to shake. The ground should be compacted and flat, and the flatness deviation should not exceed 5mm per square meter.


3. Marble or ceramic floor

When setting up tent storage on the marble or ceramic ground, it is mainly necessary to use a load-bearing plate to press the column bottom plate, and then place heavy objects such as cement blocks or stones on the load-bearing plate to fix the storage warehouse tent. The ground should be flat and flat, and the flatness deviation should not exceed 5mm per square meter.


tent storage

Tent storage has the advantages of strong load-bearing capacity, good waterproof performance, quick disassembly and installation, and low cost. However, when setting up tent storage, you need to pay attention to the ground and installation requirements. If you need to choose tent storage, it is recommended to choose a regular tent storage factory to ensure that the tent is installed correctly and safely.

whatsapp:+8617322243105whatsapp:+8617322243105
Whatsapp
emailemail
Email: [email protected]
contact uscontact us
ONLINE MESSAGE
back to the topback to the top