Several issues should pay attention when you using KENTEN CLEARSPAN STRUCTURES tent.

March 26 2020 0Comment

1.Please carefully read the KENTEN tent’s installation instructions before installing.

2.Avoid sharp objects scratching the tent when you use.

3.After using the KENTEN tent,you should collect all the spare parts for reuse;

4.The load on each bracket during stacking shall not exceed 200KG;

5.The tent should be handled as lightly as possible to prevent damage to the outer packaging to avoid losing parts;

6.If you use electrical appliances in the KENTEN tent, please pay attention to the good insulation between the wires and the iron bracket, otherwise there will be danger of electric shock.

7.Before setting up the KENTEN tent, you must carefully survey the terrain. There should be no rolling stones, logs, or weathered rocks above the camp;

8.Don’t set up KENTEN tents near river banks and dry riverbeds;

9.In order to prevent lightning strikes, do not set up tents on top of mountains or in open fields;

10.When you install the KENTEN tent on mud or sand, drainage ditches can be dug around to ensure the dryness of the ground inside the awning.

  1. When it is predicted that the local wind power exceeds eighth level, please remove the tent in advance.

12.Always dry before storing the cover, Fold and store it after it is dry again. If it is too late to dry the tarpaulin, remember to keep it for a long time to avoid coloring and mildew.

13.Please dry the tarpaulin regularly to prevent breeding of bacteria and damage to the tent’s rainproof coating.


Write a Reply or Comment